Waxes & Buffing Compound

 

PARTALL® PASTE #2

Partall® Paste #2, the original green wax, is an economical paste wax mold release formulated with hydrocarbon and microcrystalline waxes. Designed as a general purpose mold release agent on fiberglass and metal molds and as a smooth compatible prime coat for PVA coatings – such as Partall® Film #10 and Partall® Coverall Film – or as an effective stand-alone release agent where standard silicone wax releases cannot be tolerated. Available in green or clear in 1.5-lb., 7-lb., 25-lb. and 200-lb. containers.

 

 

PARTALL® HI-TEMP WAX

Partall® Hi-Temp Wax is a specially formulated paste wax mold release agent produced by combining hydrocarbon and microcrystalline waxes with Teflon®. Recommended for use with epoxy, phenolic, polyester and vinylester or other resins that cure and/or catalyze at higher temperatures, up to 350°F (~177°C), and in applications where silicone-based waxes hinder post-finishing operations. Partall® Hi-Temp Wax may also be used as a premium multiple release paste wax release with polyester and vinylester resin systems. Partall® Hi-Temp Wax is available in 12 oz. net wt. cans.

FORMULA FIVE® MOLD RELEASE WAX

Formula Five® Mold Release Wax is a silicone-based paste wax mold release agent that blends carnauba – nature’s most durable protection – with modern polymers and special hydrocarbon waxes. Formula Five Mold Release Wax is specifically developed for the Reinforced Plastic Manufacturer. Formula Five Mold Release Wax is part of a simplified multi-cycle method of releasing parts from gel-coated surfaces. Provides easy application and positive multiple releases in even the most demanding situations. Formula Five® Mold Release Wax is has the lowest silicone content in the industry. Silicone or wax transfer to finished parts can be avoided by applying PVA such as Partall Coverall Film over the last coat of wax. Available in 12 oz. net wt. cans.

FORMULA FIVE® CLEAN ‘N GLAZE

Formula Five® Clean ‘N Glaze mold buffing compound gently polishes away build-up, fine scratch marks, and surface hazing from fiber glass molds and plugs while leaving behind a durable hi-luster foundation for the releasing wax. Use of a power buffer is recommended for this application. This two in one operation, cleaner and glaze, contributes to maximum productivity and flawless parts each cycle. Formula Five Clean ‘N Glaze is not a cutting compound – safe for use with all production molds and plugs. Formula Five Clean ‘N Glaze is an effective cleaner for gel-coat surfaces, shiny metals and rubber boat rub strips; will remove chalking (oxidation) from gel coated surfaces including boats, tubs and cultured marble, and restore shine. Better, long-lasting shine with less work. Simple, effective, economical. Formula Five Clean ‘N Glaze is used widely for cleaning of fiberglass buckets and booms on hydro electric service vehicles. Packaged in 32 fl. oz. (0.95 Liter) squeeze bottles with convenient flip top.

MARBALEASE® SLURRY WAX

Marbalease® Slurry Wax is a slow drying wax mold release polishing compound designed primarily as a Flange / Edge / Hat wax but can also be used as a general purpose mold release agent for thermoset composites where a smooth post-production finish is not required (such as on the underside of cultured marble vanities, with polymer concrete, or on traditional concrete forms).  Marbalease® Slurry Wax is often used to protect equipment from overspray. Apply with a brush or cloth – mold can be prepped in advance as Marbalease® Slurry Wax will remain “wet” up to twelve hours. Marbalease® Slurry Wax is available in 5-gal. (18.9L) pails.

 

MARBALEASE® POLYMER CONCRETE RELEASE

Marbalease® Polymer Concrete Release is a fast drying liquid wax polishing compound recommended as a low cost mold release wax for use with polymer concrete (polycrete). Marbalease® Polymer Concrete Release is used with polyester or vinylester resins on fiberglass or metal molds but can also be used as a general purpose mold release agent for reinforced thermoset plastics where a smooth post-production finish is not required.Marbalease® Polymer Concrete Release is a new, simple, effective, and economical, specially developed liquid wax release agent for the polymer concrete (polycrete or GRC) industry. Apply Marbalease® Polymer Concrete Release with a brush or cloth, no need to buff, dries quickly enabling fast cycling of molds. Suitable for metal or polyester molds and for use with polyester and vinylester resins or with traditional concrete. Supplied in 5-gal. (18.9L) pails.