REXCO manufactures PARTALL^®, FORMULA FIVE^®, and MARBALEASE^® brand lines for the fiberglass and cultured marble industries. Products include semi-permanent mold release agents, mold cleaners, mold release waxes, polyvinyl alcohol (PVA) parting film, mold polishes and buffing compounds, such as environmentally friendly PARTALL^® Coverall Film, a superior low-VOC, non-hazardous PVA (Polyvinyl Alcohol) parting film and premium waxes such as FORMULA FIVE^® Mold Release Wax and PARTALL^® Hi-Temp Wax with Teflon^®.

Semi-permanent Mold Release System -

• FORMULA FIVE^® Semi-permanent Mold Release System: FORMULA FIVE^® Semi-permanent Mold Release gives the molder of thermoset composite parts reduced cost through improved productivity and cosmetic consistency and lower rejection rates (less scrap parts). It will not transfer to parts eliminating the need to clean prior to post-finishing operations such as painting or bonding. Benefits include reduced labor, greater part yield (more pulls between applications), less mold build up and less down time for mold maintenance. Easy wipe on/leave on or spray on/wipe off application.

Waxes –

• PARTALL^® Paste #2: The original green wax, paste wax mold release compound, available in green or clear, silicone free. There is no better protection for new or green molds.

• PARTALL^® Hi-Temp Wax:  Teflon^® (PTFE - polytetrafluoroethylene) fortified mold release paste wax, silicone free, ideal for use with epoxy and phenolic resin systems, also very effective with polyester and vinylester systems.

• FORMULA FIVE^® Mold Release Wax: Carnauba based paste wax compound with silicone to aid buffing and enhance release and temperature capabilities.

• MARBALEASE^® Slurry Wax:  A general purpose flange, edge, hat wax, silicone free, slow drying.

• MARBALEASE^® Polymer Concrete Release:  A fast drying liquid wax used on metal or GRP molds, silicone free, sprayable.

Parting Films – PVA (polyvinyl alcohol) barrier solutions -

• PARTALL^® Film #10, traditional alcohol-containing PVA with superior lay-out qualities, designed for spray application (also suitable for roller or sponge application), available in green or clear, solvent resistant yet water soluble.

• PARTALL^® Coverall Film, low-VOC, non-flammable, higher solid content PVA with superior lay-out qualities even over silicone-containing waxes, designed for spray application (also suitable for roller or sponge application), available in purple or clear.

• Partall^® OCF-55 and Partall^® X-08, specialty PVA, with higher alcohol content for faster drying, designed for roller application.

Buffing Compound –

• FORMULA FIVE^® Clean ‘N Glaze, used to prepare and maintain  fiberglass (GRP) molds and to restore shine to oxidized gel-coat products. Cleans shiny metal and rubber rub rails. Gives a better, longer lasting shine with less work at a lower cost than competitor's.