PARTALL® POWER LIQUID MOLD RELEASE
Partall® POWER Liquid Mold Release is a non-hazardous water-based polymeric external mold release that gives a matte finish (non-cosmetic finish) to parts. It is designed for use on most mold substrates including FRP/GRP composite (fiber glass), glass, aluminum and steel. This product provides multiple releases, ease of application, and minimal fouling of tooling during processing. PARTALL® POWER Liquid Mold Release is ideal for spraying on hot molds, for use in compression molding, resin transfer molding and filament winding operations. Partall® POWER Liquid Mold Release is recommended for use with most thermoset composites including polyester, vinylester and epoxy and molding processes including contact molding and closed molding. Suitable for application to high temperature surfaces or for high molding process temperatures.
PARTALL® POWER GLOSSY LIQUID MOLD RELEASE
Partall® POWER Glossy Liquid Mold Release is a water-based, non-hazardous, silicone-free semi-permanent external mold release agent that gives a high gloss finish to parts. Will not transfer to parts and interfere with painting or bonding. Designed for use on most mold substrates including FRP/GRP composite (fiber glass), glass, aluminum and steel. This product provides multiple releases, ease of application with superior wet polishing, and minimal fouling of tooling during processing. Partall® POWER Glossy Liquid Mold Release is recommended for use with most thermoset resins and rubbers. Applied over a sealed mold, it forms a smooth, durable, glossy film with excellent adhesion to the interfacial coating.
- Non-hazardous – non-flammable
- Simple wipe-on or spray-on application
- Excellent mold surface wet-out, easy polishing
- Fast ambient temperature cure
- Cures to a durable hard film without smudges
- Renders an even high gloss finish to molded parts
- Odorless, non-hazardous and non-flammable
- Contains no Hazardous Air Pollutants (HAPs) or Volatile Organic Compounds (VOCs)
PARTALL® HT-PT
PARTALL® HT-PT Liquid Mold Release is a liquid polymeric mold release (solvent-based fluropolymer) that dries at room temperature. A silicone-free external mold release agent that gives a matte or glossy finish to parts depending on method of application. Use in most composite processes including hand and spray lay up, RTM, compression, casting, vacuum bagging or with pre-pregs. Offers multiple part releases and will not interfere with post-finishing or bonding operations. For use with most thermoset resins including polyester, vinyl ester, epoxy and phenolics. Suitable for use on most mold substrates including FRP/GRP composite, glass, aluminum and steel. Easy to use and handle with wipe on application and easy wet polishing.